Search Results
Displaying 390 results
-
Private: Chemisens CPA202 Bench Unit
The Chemisens CPA202 Bench Unit is a sophisticated, temperature-controlled bath in which the reactor vessel itself is immersed. The fluid inside the bath absorbs the heat generated in the reactor during exothermic processes and serves as another safety system of the Chemisens Calorimeter. The reactor is placed in the unit […] -
Private: Chemisens CPA202 System Controller
The Chemisens CPA202 System Controller is the interface unit between the control PC and the calorimetry system. All critical safety and control circuits that are critical for safe and smooth operation are in this unit. If any communication failure with the operator PC or any other crucial part of the […] -
Private: Chemisens CPA202 20 Bar Reactor
The Chemisens CPA202 20 Bar Reactor is a cylindrical, double-walled glass vessel closed at both ends with stainless steel parts. The reactor base includes the heat flow sensor, the Peltier element, and an outer metal enclosure. Ports are provided in both the lid and the base for auxiliary probes, dosing […] -
Private: ChemiCall Software Suite
The Syrris Chemisens Calorimeter systems are controlled using ChemiCall, a modern and intuitive software suite. The ChemiCall suite includes the standalone data evaluation and reporting software, CCReport. This bundle comes preinstalled on a PC delivered with the system. -
Private: Chemisens VRC202 Dosing and Sensors Controller
The Chemisens VRC202 Dosing and Sensors Controller is a dosing controller/measuring unit to be used together with the Chemisens System Controller. All control of output signals from the VRC202 Dosing and Sensors Controller as well as the readings of the input signals are accessed via the ChemiCall Software Suite. The VRC202 Dosing […] -
Private: Chemisens Batch Injector for Solids
The Chemisens Batch Injector is designed for batch dosing of solid and extremely viscous materials. The injector is charged, closed, and then installed inside the Chemisens reactor. It can be opened remotely and all the enclosed material is then delivered to the reacting system inside the reactor. Both the injector […] -
Collection Vessel Clamp
The Orb Pilot Collection Vessel Clamp fits to the Accessory Tower to allow the mounting of receiver & feed vessels. -
Private: Chemisens Gravimetric Dosing Kit
The Chemisens Gravimetric Dosing Kit consists of a balance, tubing, and dosing pump compatible with the VRC Dosing Controller, supplied by world-leading manufacturers. The VRC Dosing Controller can operate 2 gravimetric setups controlled by the ChemiCall Software Suite at the same time. This module is for the following Syrris products: […] -
Private: Chemisens MSC202 High-Pressure Syringe Pump
The Chemisens MSC202 High-Pressure Syringe Pump is designed to give a non-pulsating flow over a large flow rate range, up to counter pressure of 100 bar. The MSC202 High-Pressure Syringe Pump is remotely controlled via RS 232 communication using the VRC202 Dosing and Sensors Controller. Direct manual operation of the […] -
Private: Chemisens CPA201 Bench Unit
The Chemisens CPA201 Bench Unit is a sophisticated temperature controlled bath in which the reactor vessel itself is immersed. The fluid inside the bath absorbs the heat generated in the reactor during exothermic processes and serves as another safety system of the Chemisens Calorimeter. The reactor is placed in the unit […] -
Private: Chemisens CPA201 System Controller
The Chemisens CPA201 System Controller is the interface unit between control PC and the calorimetry system. All critical safety and control circuits that are critical for safe and smooth operation are in this unit. If any communication failure with the operator PC or any other crucial part of the Chemisens […] -
DN300 Clamp
The Orb Pilot DN300 Clamp can be added to the DN235 Frame Kit to enable it to accept the 50 L glass vessel reactors. Two simple fixings allow the clamps to be exchanged in seconds making it trivial to switch between 50 L and the other vessel sizes.