This part includes a full set of consumables and wearing parts for the Stirrer Seal and Guide.

A set of five replacement FFKM O-rings for use at the base of the Stirrer Seal and Guide

Two pairs of replacement seals that fit inside the Connector - Oil Pipe to Jacketed Vessel (2200018).

A replacement FEP coated silicone O-ring for use with the Jacketed Reactor and Lid (2101030 / 2101594).

A replacement FFKM O-ring for use with the Jacketed Reactor and Lid.

Replacement PTFE Reaction Vessel Bottom Outlet Valves for use with Jacketed Reactors.

Replacement FFKM O-ring for the lower seal of a jacketed vessel bottom outlet valve.

Replacement FFKM O-ring for the upper seal of a jacketed vessel bottom outlet valve. FFKM is the sealing material that offers the highest chemical resistance.

5 Gallons (18.92ltrs) of circulator fluid recommended by Syrris and approved by most major recirculator manufacturers.

10 litres of circulator fluid recommended by Syrris and approved by most major recirculator manufacturers. This fluid is suitable for operation in the range +20 to +250°C (flash point >+270°C).

10 litres of circulator fluid recommended by Syrris and approved by most major recirculator manufacturers.

10 litres of circulator fluid recommended by Syrris and approved by most major recirculator manufacturers.

Extension pump head for multi-channel pumping.

Syrris provides a range of tubing suitable for use in peristaltic pumps.

Various valve types depending on number of inputs and outputs required for Atlas Syringe Pump.

Various sized syringes for Atlas Syringe Pump.

A pack of 10 pairs of flangeless ferrules and 1/4-28 fittings for 1.6mm pipe.

A pack of 10 pairs of flangeless ferrules and 1/4-28 fittings for 3.2mm pipe.