The Atlas base unit is the centre of any Atlas system. The Atlas base can be configured into a variety of different systems for different applications such as discovery or process chemistry. In every case, the hardware clicks into place in seconds without the need for tools.

The hotplate for the Atlas base unit connects via a bayonet fitting and is automatically detected. Max temp 280°C.

The Hot and Cold Plate connects to the Base Unit via a bayonet fitting and to a circulator.

The Atlas Hot and Cold Plate for Regular Hotplate Stirrers fits virtually any magnetic stirrer or stirrer hotplate

The Magnetic Stirrer connects directly to the Base Unit using a bayonet fitting. The stirrer is automatically detected by the Base Unit.

The Scorpion Stirrer system provides auto aligning overhead stirring from 0 to 800rpm for Atlas.

The Scorpion Drive Head is a replacement part for the Scorpion Overhead Stirrer (2101004).

The High Torque Stirrer Adaptor (for Heidolph Stirrers, when used in conjunction with a Heidolph Stirrer offers a high torque (with torque measurement) alternative to the Scorpion Overhead Stirrer.

Heidolph RZR 2051 Control Overhead Stirrer (230V / UK) (2200254) Heidolph RZR 2052 Control Overhead Stirrer (230V / UK) (2200255) Heidolph RZR 2051 Control Overhead Stirrer (230V / EU) (2200267) Heidolph RZR 2052 Control Overhead Stirrer (230V / EU) (2200268) Heidolph RZR 2051 Control Overhead Stirrer (110V / US) (2200269) Heidolph RZR 2052 Control Overhead Stirrer (110V / US) (2200270)

The Stirrer Seal and Guide holds a standard 8mm PTFE, or glass stirrer shaft and gives a chemically resistant, vacuum tight seal onto a standard round bottom flask or jacketed vessel lid.

When using the Stirrer Seal and Guide (2101011) with round bottom flasks, it is possible to use this device to make the separation of the flask and the Stirrer Seal and Guide easier.

The Atlas Syringe pump is a versatile volumetric dosing system that consists of two syringes and can be configured into 2 independent dosing pumps or 1 continuous pump.

The Atlas Syringe Pump (2200072) is supplied with 4 ports and 2.5ml syringes by default. The Atlas Syringe Pump without valves or syringes allows valves and syringes to be purchased separately.

The Autosampler Module is designed for use with the Atlas Syringe Pump (2200072) and Autosampler Probe (2200197) to aspirate up to 6 samples from a reactor at user defined intervals. 

The Autosampler Probe is designed for use with the Atlas Syringe Pump and Autosampler Module to aspirate up to 6 samples from a reactor into HPLC vials at user defined intervals.

The Temperature Node allows RTD Probes to connect to the Base Unit.

This module consists of a pH Node and a Temperature Node and can be used to measure either pH or temperature, or both.

The Turbidity Node allows the Turbidity Probe to connect to the Base Unit. The turbidity measured is displayed on the front panel of the Base Unit.

The Node Extension allows nodes to be connected away from the main Base Unit. The Node Extension includes a clip to connect it to the Support Rods.

The Triple Node Socket connects to the node port at the rear right of the Base Unit and can be used to connect up to three Nodes.

The Six Way Node Socket connects to the node port at the rear right of the Base Unit and can be used to connect up to six Nodes.

The Jacketed Vessel Clamp is a quick-release clamping mechanism for Atlas jacketed reactors.

The Remote Mount allows a vessel assembly to be located away from the Atlas Base Unit.

The Atlas Clamp is a quick-release clamping mechanism for reaction flasks and other devices.

When overhead stirring round bottomed flasks, this module should be used to support the Scorpion Overhead Stirrer.

The Triple Clamp is a three position clamping mechanism designed to be used with the Triple Dry Bath (2101042) and can hold up to three flasks which can be different sizes.

The Atlas Oil Drain Unit provides the ability to drain oil from a Jacketed Reactor Vessel back into a recirculator without exposure to the oil.

Atlas Ports are an interface between RS232 devices and the Atlas Software (2300102).

The Watson Marlow 323/DU/D Peristaltic Pump can be connected to an Atlas system to provide pumping of a wide range of liquids into any type of vessel.

The Denver Summit Balance can be connected to the PC via a Port (2101020) for control using the Atlas Software (2300102)

TTI Power Supply for Calorimetry (230v)(2200141) TTI Power Supply for Calorimetry (115v)(2200151)

Prosonix Sonolab SL10 Sonocrystallizer(RD2200250) Sonocrystallizer Accessories Pack (RD2200251)

Bruker FTIR Spectrophotometer Matrix-MF (RD2200249)Software Drivers (RD2600005)

Reactor Master Basic (RD2200247) Reactor Master Pro (RD2200248) Reactor Master Software (RD2600004)