www.syrris.com - accelerating chemistry

PRODUCTS

Flow Reactor Systems
•  FRX
•  Africa
•  Asia

Batch Reactor Systems
•  Atlas
•  Atlas Calorimeter
•  Custom Reactors 

Med Chem Software
•  Medstere

APPLICATIONS
•  Flow Chemistry
•  Aqueous workup
•  Discovery chemistry
•  Process chemistry 
•  And many more...

NEWS
Syrris Launch Ultra Smooth Flow Chemistry Pump

Asia - new, ultra smooth flow chemistry pump


Medstere generates non-obvious alternatives to leads
Medstere - generates non-obvious alternatives to leads

MORE INFORMATION

•  Distributors
•  Our Location
•  Syrris Events
•  Site map


Main Categories > FRX > FRX Accessories and Consumables

 

Syrris offer a wide range of accessories and consumables for FRX including user serviceable parts, starter kits and day to day consumables.


Cooling Insert Barbed Fittings (Pack of 2, 2101416)
These 3/8” BSP fitings are designed to connect the Cooling Insert to a circulator.




 
Back Pressure Regulator (BPR, 2110706)
The back pressure regulator (BPR) is a replacement for the BPR attached to the pressurisation module.




 
FRX Collection Needle (2101381)
The Needle for the Collection Module is a replacement anodised aluminium guide for the tubing as it passes into the Collection Module. This allows tubing to be located above the collection vials.




 
FRX Collection Bottle (2101314)
The FRX Collection bottle is a 500ml glass bottle with an adaptor on the top for an FRX Collection Needle.




 
FRX Pneumatic Adaptor Pack (2101352)
The Pneumatic Adaptor Pack is a range of adaptors which can be used to connect the FLLEX and Pressurisation Module to common laboratory gas supplies.




 
Flow Tubing Starter Kit (2110713)
The Flow Tubing Starter Kit contains a range of different consumables required to get users started with flow chemistry.




 
Pluming Sets
FRX plumbing sets include all the tubing needed to connect all the modules supplied with each of the standard FRX systems.




 
Luer Fitting for Reagent Module (Pack of 4, 2110772)
A pack of 4 replacement Leur syringe adaptors for use with the Reagents Module.




 
Sample Loops
The Sample Loops fit in the Reagents Module and allow reagents (or solvents) to be added in-line, rather than being pumped through the pumps.




 
Chip Header FFKM Seals (Pack of 10, 2110721)
The chip header seals help make the connection between the Microreactors or chips and the input/ouput pipes held in the Chip Header.




 
Chip Header Blanking Plug (2100210)
Inputs to chips can be sealed off using the Chip Header Blanking Plug. This enables a 3 input chip to also be used with 1 or 2 inputs and a 2 input chip to used with just 1 input.




 
Plug for 1/4" - 28 Ports (Pack of 6, 2110672)
These plugs can be used to seal off a 1/4"-28 port (the most common type of fitting in Syrris flow systems).




 
BPR Chip (2100737)
A replacement glass chip for use with the Back Pressure Regulators contained within the FLLEX Module and Pressurisation Module.




 
BPR Diaphragm Set (2 Sets, 2100737)
The BPR diaphragms are located in the BPRs (Back Pressure Regulators) in the Pressurisation Module and FLLEX Module.




 
FLLEX Chips
Replacement glass and PEEK chips for the separator in FLLEX.




 
FLLEX 25mm PTFE Membrane (Pack of 10, 2101508)
A Pack of 10 replacement PTFE hydrophobic membranes for use within the FLLEX Module.




 
FLLEX Tubing
Tubing than enters the FLLEX separator uses specialist FFKM connectors. The pipes listed here are direct replacement for the ones supplied with the system.




 
PTFE Pipe Gripper for 1.6mm OD Pipe (Pack of 10, 2200102)
The PTFE Pipe Gripper for 1.6mm OD pipe is used for the majority of pipe connections in FRX systems and is used with either the Compact Head Fitting for 1.6mm OD Pipe or Large Head Fitting for 1.6mm OD Pipe.




 
Compact Head Fitting for 1.6mm OD Pipe (Pack of 10, 2200103)
The Compact Head Fitting for 1.6mm OD Pipe is used with the PTFE Pipe Gripper for 1.6mm OD pipe to make tubing connections.




 
Large Head Fitting for 1.6mm OD Pipe (Pack of 10, 2200104)
The Large Head Fitting for 1.6mm OD Pipe is used with the PTFE Pipe Gripper for 1.6mm OD pipe to make tubing connections.




 
Long Compact Fitting for 1.6mm OD Pipe (2101508)
The Long Compact Fitting for 1.6mm OD Pipe is used with the PTFE Pipe Gripper for 1.6mm OD pipe to make tubing connections.