Hot and Cold Plate benefits Easy to use: The Hot and Cold Plate is connected to      the Atlas Base using a bayonet fitting and is        interchangeable with the standard Atlas Hot Plate. Compatible with a range of accessories: The Hot      and Cold plate has a standard diameter of 13.5 cm (5      5/16”).   This is compatible with the Atlas Stacking Dry      Bath, Triple Dry Bath, Vial Baths, Orbit Parallel      Reaction Station and virtually all other products      designed to fit on hotplates. Integrated stirring: The Atlas Magnetic Stirrer      module screws directly into the Hot and Cold Plate to        provide high quality magnetic stirring. Accurate temperature control: The Hot and Cold      Plate has an embedded RTD allowing feedback of      plate temperature. Alternatively a PTFE coated RTD      can be inserted in the reaction and that temperature        controlled. Easy connection: The Hot and Cold Plate can be      used with either standard M16 fittings or Atlas Quick        Circulator Connecters which require no tools for a leak      free rapid connection. Icing issues minimised: An integrated drip tray      collects condensation and melting ice. Covers is      also available to minimise ice build-up. Chemically resistant: The anodised aluminium plate      provides a “wipe clean” surface. Wide temperature range:  Fully tested between       -40°C and 160°C. Temperatures logged:  The temperature of the Hot      and Cold plate is fully logged (as with all data on an        Atlas System) and can be downloaded to a USB stick      for offline analysis.

Insulating covers Circulators that can be controlled by the Atlas Base The Atlas Base unit can be used to directly control the following circulators (note that other types of circulator can be controlled using the Atlas Software or used without feedback control). Huber Unistat 340 Huber Ministat CC230 Huber Tango Nuevo Julabo (All modern Julabo circulators can be controlled      from the Atlas front panel).