|
The FRX400 includes all the functionality of FRX300 but also has the full range of Syrris reactors, 4 Pumps, 2 Hotplates, 2 Reagent Modules and the Cooling Insert. This enables up to 4 inputs into a multi step reaction or 3 inputs and an immiscible aqueous work-up stream, reaction steps at different temperatures, cooling to -20°C and injection of small quantities of up to 4 reagents via sample loops.
The FLLEX (Flow Liquid Liquid EXtraction) Module combines two immiscible phases in a mixer to give rapid partitioning, then separates the two phases as a continual flow process. Reaction optimisation and preparative synthesis are possible using the full range of micro reactors, tube reactors and solid-phase columns.
The inclusion of solid phase columns allows solid supported reagents, scavengers and catalysts to be used. The system also includes a Pressurisation Module, enabling operation above solvent boiling points, and a Collection Module which allows manual collection of different reactions.
All of the tubing required to connect the modules is provided cut to length, pre-terminated and labelled for convenience. Extra tubing and connectors are also supplied in the form of a Flow Tubing Starter Pack. A Pneumatic Adaptor Pack is included in the FRX400 system to allow easy connection of the Pressurisation Module to a variety of common laboratory gas fittings.
For individual module specifications, visit the FRX catalogue section | 
